Old style "Type A" power tilt & trim with an old style single solenoid. Pump motor runs, but only down, not up. Tilt limit override clicks when you press the "Trailer" button. Trim controls are in the Quicksilver throttle arm.<br /><br />Any tips to troubleshoot to determine if it's the switch vs the solenoid? What do I jump the light blue/white trim up wire to in the throttle arm to bypass the switch to see if the solenoid works? What else should I check? I'm not 100% sure I got it all wired up correctly when I put this newer trim motor in...<br /><br />I have an old dual solenoid setup I could swap in, but is THAT any good... And I have to remember how to hook it up!
