Power trim V150 mercury

stocky

Seaman Apprentice
Joined
Apr 24, 2002
Messages
43
Have not used the boat for about 18 months. This weekend gave her a check out and the power trim is not working. When I switch either up or down all I get is a click sound from down around the pump. Do you think that over time the pump has frozen or do you think there could be something else wrong. The engine is a 150 black max early 80's. Thank you all in advance.
 

Barnacle_Bill

Admiral
Joined
Feb 8, 2004
Messages
6,469
Re: Power trim V150 mercury

Check all your connections and make sure they are clean and tight.
 

KCLOST

Commander
Joined
Jun 22, 2002
Messages
2,095
Re: Power trim V150 mercury

Was the motor stored for that period of time in the down position?<br /><br />Did you see any oil leaking from anywhere or on the ground before working on it? <br />It's possible it just is low or has leaked all fluid as the resevoir is under pressure while in the down position.
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Re: Power trim V150 mercury

Sounds like a siezed trim pump motor.
 
Top