Re: Pulley steering help
Hi there Fp. The 2 ends of the cable should be back at the motor well. They should attach to the motor. You need to loosen the cable from the motor first. Back at the spindle, all you need to do is wrap the slack in the cable 3 or 4 times around the spindle. It should look like a big screw with threads. You may need to have someone hold tension on the cable from back at the motor while you do this. After you wrap the cable on the spindle 3 to 4 times, turn the wheel til the cable wraps are midway between the top and bottom of the spindle. Lock the steering wheel in place with a piece of rope or something. Now re-tighten the cables back to the motor. Turn the steering wheel full left and full right to make sure all is okay. If you're not getting full steerage, you may have too much cable on one side or the cable may not be long enough. If it's binding, you should be able to locate it easily. Very simple trouble free system. Good luck.
