PULLING HARD TO THE RIGHT SIDE???

silverking

Seaman Apprentice
Joined
Aug 6, 2002
Messages
37
Hi guys,<br />I have a problem: my boat is pulling really hard to the right side, at high speed is almost a suicide.<br />I already check almost everything down there, also i moved the fin a little, but nothing happens :confused: <br />How to solve this problem :confused: , I have no idea about whats going wrong with my boat or engine.<br />Maxum 16ft x 7.2ft, Merc 115hpELPTO,60mph top speed, Fish & ski.
 

sfels

Seaman Apprentice
Joined
Jul 25, 2002
Messages
43
Re: PULLING HARD TO THE RIGHT SIDE???

Assuming there's nothing strange hanging on your hull it sounds like a trim adjustment. If you've already adjusted the trim tab (the little fin) on the motor, try trimming up or down while underway. The boat's properly trimmed when the wheel pressure is equal left and right.
 

Pursuit2150

Chief Petty Officer
Joined
Dec 3, 2001
Messages
553
Re: PULLING HARD TO THE RIGHT SIDE???

Move the fin approx. 4 deg.See if that helps
 

KCLOST

Commander
Joined
Jun 22, 2002
Messages
2,095
Re: PULLING HARD TO THE RIGHT SIDE???

SilverKing,<br /><br />When you move the trim tab (fin), make sure you move it in the correct direction. If the boat pulls to the right, the back of the trim tab should be moved to the RIGHT. Or looking from the top, the tab should be turned COUNTERCLOCKWISE.<br />I messed this up. The trim tab is not a rudder like an outboard motor, rather a torque equalizer that will force the outboard to the left (in your case) if adjusted properly. If you move the tab to the left it will just make things worse....
 
Top