Quicksilver bell housing gasket set 27-94996Q2

[mr-steve-jones]

Hello All,

Quick question....

Can anyone tell me what O-ring seals come in the Quicksilver gasket set 27-94996Q2 for the drive to bell housing seals?

The gasket and the large bellows seal, and water inlet are a given as included, but do I get the 3 drive shaft O Ring seals in the kit too, or are they to be purchased seperately?

Thanks.. Steve.

 

[Bondo]

Re: Quicksilver bell housing gasket set 27-94996Q2

Hello All,

Quick question....

Can anyone tell me what O-ring seals come in the Quicksilver gasket set 27-94996Q2 for the drive to bell housing seals?

The gasket and the large bellows seal, and water inlet are a given as included, but do I get the 3 drive shaft O Ring seals in the kit too, or are they to be purchased seperately?

Thanks.. Steve.

Ayuh,.... Not sure on the Mercruiser sets, but the Sierra sets are Complete....

 

[Don S]

Re: Quicksilver bell housing gasket set 27-94996Q2

Yes.

 

[achris]

Re: Quicksilver bell housing gasket set 27-94996Q2

Hello All,

Quick question....

Can anyone tell me what O-ring seals come in the Quicksilver gasket set 27-94996Q2 for the drive to bell housing seals?

The gasket and the large bellows seal, and water inlet are a given as included, but do I get the 3 drive shaft O Ring seals in the kit too, or are they to be purchased seperately?

Thanks.. Steve.

This is what the Merc kit has in it...

Chris.........

 

[mr-steve-jones]

Re: Quicksilver bell housing gasket set 27-94996Q2

Thanks for the confirmation Gents!.. Help appreciated as always!

Hit some rocks last weekend so took my drive off to repair it.. Thats why I'm asking so I know what parts to buy.
Skeg welding repair went very well even though Argon gas was expensive!!!.. Mig welded at the weekend and re shaped.. Looks new again. Painting it now. I'll put a new gimbal bearing in and change the bellows while its off... Forced my hand a couple of months early on the 3 year service. Hope I'll still have some summer left to enjoy it when i get it back together

Cheers.. Steve.