I am looking to find the prop lock parts for the quicksilver power 2. I know that it is very difficult but thought i may ask. i have the prop A19. Any of them especially spring and it's axle. Thx
I got one not sure what your calling the axle. Looks like if your making one a torsion garage door spring would work. I took the measurements on the carrier as seen. Outside diameter is 1.52 inch. Length of coiled spring. Not including the 2 right angle tongs. 2.62 inch. Spring diameter .2 inch. All measured with a dial caliper.
If you need more to make more of it. I can take it apart for the internal parts and measure them.
that's great. Yes that is what i am thinking to do, make one. If you could do that - measure everything - it would be very helpful. Axle i mean the nut, where the spring goes. Some pictures of with measures of it could help.
that's great. Yes that is what i am thinking to do, make one. If you could do that - measure everything - it would be very helpful. Axle i mean the nut, where the spring goes. Some pictures of with measures of it could help.
Crowley marine has the cam plate your looking for and a few more odds and ends things. I PM'ed you my e mail. The PM system here is so screwed up it barely works. And it hard to read blinking like that. I see the axle nut on the diagram. I thought that was what you were looking for I will measure that thing and draw a diagram for it for you. There is a complete one on e bay for 500 bucks right now.
