raw water pump bearing

galaxy 215

Cadet
Joined
Nov 10, 2013
Messages
12
Hello everyone. As I progress in my boat repair I now have the engine in pieces(rusty cylinder walls) I have found everything I need to do to it and have 99% of the parts. I just need to know where to find a comprehensive rebuild kit for the raw water pump. I believe it's a Johnson f5 pump? Mounted to the front of the crankshaft pulley and has a splined impeller. Thanks for any replies
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,095
Re: raw water pump bearing

Hello everyone. As I progress in my boat repair I now have the engine in pieces(rusty cylinder walls) I have found everything I need to do to it and have 99% of the parts. I just need to know where to find a comprehensive rebuild kit for the raw water pump. I believe it's a Johnson f5 pump? Mounted to the front of the crankshaft pulley and has a splined impeller. Thanks for any replies

Ayuh,.... Welcome Aboard,.... How 'bout some hints on what We're workin' on,..??

What motor,..??

What drive,..??

What vintage,..??
 

galaxy 215

Cadet
Joined
Nov 10, 2013
Messages
12
Re: raw water pump bearing

Engine is a 4.3 chevy,outdrive is Volvo penta dp-c,boat is a 1992 galaxy cuddy. Impeller confirms it's a Johnson pump.
 

dypcdiver

Lieutenant Junior Grade
Joined
Nov 1, 2005
Messages
1,040
Re: raw water pump bearing

There are several posts on this forum that detail just what you want, please use the search at the top of this page.
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
18,075
Re: raw water pump bearing

If you can't find it here.
Try Cobe Marine in Pasadena,Md.
Good Volvo parts and have all the pump and cooling parts you'll need.
 

galaxy 215

Cadet
Joined
Nov 10, 2013
Messages
12
Re: raw water pump bearing

Things are going very well . Bellhousing all redone with new bearing/seals,raw water pump rebuilt with Volvo parts,engine almost done(waiting for head gaskets), outdrive just needs reassembly, Going to wait till spring for outdrive reinstall and engine run but I'm very happy with the cost of the parts .I've used-both marine and non marine. I have about 500 into the entire driveline. Rings,bearings,u joints,seals, gear oil, head resurface,gaskets. Should be a fun summer. Just wanted to say ,thanks to everyone here for there help/comments in my driveline overhaul.
 
Top