iwombat
Captain
- Joined
- Jul 12, 2006
- Messages
- 3,767
So, I've finally got all the performance upgrade pieces assembled and the short-block ready to get machined on my '80 100hp. Now, I'm just curious about jetting. Here's what is getting added.
High-compression heads
Large throat (1-5/16") carbs
Boyesen Reeds
Bubble-back exhaust (if I can find one)
I'm kind of concerned about blowing out the Boyesen reeds with the wrong jetting given all the modifications. So, I'm thinking one plan may be to dial in the jetting w/ the stock reeds, then put in the Boyesens and enrichen by a couple of sizes. If someone here has a good starting point to work from I'll skip that step.
Ideas?
High-compression heads
Large throat (1-5/16") carbs
Boyesen Reeds
Bubble-back exhaust (if I can find one)
I'm kind of concerned about blowing out the Boyesen reeds with the wrong jetting given all the modifications. So, I'm thinking one plan may be to dial in the jetting w/ the stock reeds, then put in the Boyesens and enrichen by a couple of sizes. If someone here has a good starting point to work from I'll skip that step.
Ideas?