1946Zephyr
Vice Admiral
- Joined
- Oct 21, 2008
- Messages
- 5,556
SO, today I decided to pick away at this project a little more. I took the front half of the crank case out of the chem-dip and cleaned it all up. I installed the pistons and the crank too and everything is in good shape.
Here are a couple pics if this little booger. It's funny seeing an engine so damned small
I set a quarter in the cylinder there, so you can see what I mean. I should take a pic of it, setting next to a Ford 460 block, which will be my next project.