Remote conversion continues - help with controls - Johnson 25hp 1993 J25TEETS

KC8QVO

Petty Officer 1st Class
Joined
Jun 19, 2012
Messages
247
Attached are a couple pictures of my project. This has been in the works for quite some time. Here is an earlier thread I had on the helm design.
http://forums.iboats.com/forum/boat-...and-visibility

I was able to get to the lake last weekend and work on things. The helm works very well. I have some minor tweaking to do to it, but I am happy with the results. My wok earlier paid off with the mock-up.

The challenge I am up against now is proper motor controls - shifter, cables, and linkages. Are there any recommendations any of you have on an economical way to do a remote shifter and throttle control? I would like to have a single lever like a normal boat but I am also considering making a dual lever shifter/throttle, but I am not sure what kind of cables to try to make work. I made some brackets for the throttle control so it wouldn't be too hard to retrofit something else with those brackets. Though, I am sure there is a proper "kit", its just near impossible to find one.

Another question I have is if there are any kind of "clamp" devices that would work on the side rails on the boat - such as an attachment for a canopy upright?
 

Attachments

  • photo224912.jpg
    photo224912.jpg
    167.2 KB · Views: 1
  • photo224913.jpg
    photo224913.jpg
    188.2 KB · Views: 1
  • photo224914.jpg
    photo224914.jpg
    177 KB · Views: 0
  • photo224915.jpg
    photo224915.jpg
    175.6 KB · Views: 0
  • photo224916.jpg
    photo224916.jpg
    177.5 KB · Views: 0
  • photo224917.jpg
    photo224917.jpg
    191.4 KB · Views: 0
Last edited:
Top