FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I am in the process of replacing the carpet in an aluminum boat and need some help.<br /><br />As you will be able to tell I am looking for the easy way out!! Is there anything that will dissolve carpet glue from an aluminum boat surface.
I have also used the stiff wire brush and angle grinder works well. After your done you can then wash down with water and clean up the dust. After you have everything clean you can trowel on your glue and then lay your carpet.
That is the easy way. <br />Just be sure to use a good dust mask, eye goggles, a long sleeve shirt, pants, and gloves. those wires can and will embed in your fingers. I know.
<br />Just be sure to use a good dust mask, eye goggles, a long sleeve shirt, pants, and gloves. those wires can and will embed in your fingers. I know. 