azirish77
Cadet
- Joined
- Feb 14, 2010
- Messages
- 12
I just took out my boat for the first time of the season after getting the impeller changed. When I dropped the boat in the water, the engine started right up. After idiling for a few minutes, I noticed that it was running pretty hot.(About 200) It then sputtered a little bit, backfired, and cut off. I let it cool and attempted to start again. It started after a few minutes, but continued to run hot. I then shut it down and let it sit for an hour or so. After an hour, I started it back up so that I could take it to the trailer. It started right up and I made my way back to the ramp. The gauge was now reading about 160 degrees. It ended up running fine all weekend. My question is...
Is it normal to run hot after sitting for 6 months and putting in a new impeller?
Is it possible that something was sucked in and eventually passed through?
Thanks for all of your help
Is it normal to run hot after sitting for 6 months and putting in a new impeller?
Is it possible that something was sucked in and eventually passed through?
Thanks for all of your help