Good afternoon everyone. I am having a problem and i'm getting close to cussing. I wrote earlier about a fuel problem and got good answers. I cut the pick up tube off so about an inch above bottom i relocated the pump ball and it all seems to be better and actually boat got a little more rpms so that great. New problem is pump ball does not go flat and fuel is flowing no air bubbles but I will be going along and then it drops to 3500rpms and all the sudden jump back up then down and remain down. When I get back to the house and check all coils are firing and spark is good. I tried turning off wait a bit and turning back on hoping to clear SLOW to know avail. Compression is good 90+/-2 on all 6 cylinders. I thought just to change coils that possibly after running they may short out. I checked temp and its really good. I was having a fuel problem earlier and with the advise I got that part cleared up. Any Ideas. Motor is E200TXECM 1998.
I am open to all ideas.
Thanks for all the help. More information if needs
I am open to all ideas.
Thanks for all the help. More information if needs