FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I have a 75 merc 650, 65 hp on a 20 ft pontoon. It has a 10.5x13 prop now.Top rpm is 4600. Manual specs, 5000-5400. Does a 11.5x10 or 12x10 sound reasonable? Thanks in advance
As a rule of thumb every inch of pitch will add or reduce WOT rpm by 200 increasing diameter will also reduce rpm as will the amount of cupping on the prop & the thickness of the blades etc etc as you can see there are many variables.I would try the 11.5 x 10.Good luck
