sensor pulse witch way clock\w or anti clock\w if fiywheel turns clock\wise

[durban]

i do not have a timeing light yet , iam trying to figure out on witch side from a 12o,clock position on my coil ,i know were the no1 piston is located on the coil , the timerbase tells me that, as inside underneath the sensors they are marked , now iam trying to position the sensor from a 12 o ,clock position in relation to the coil,once i know witch way the pulse goes clock wise or anti clock wise , then i can work it out just, need to know the pulse direction , because that will tell me whether iam advanced or retard, thanks

 

[Daviet]

Re: sensor pulse witch way clock\w or anti clock\w if fiywheel turns clock\wise

You might get more results if you post what you are working on, post the model number.

 

[durban]

Re: sensor pulse witch way clock\w or anti clock\w if fiywheel turns clock\wise

the model is 1977 70hp evinrude 70773s i have fitted the timerbase & sensor to my 1970 60hp 60072d getting heaps of spark just need to find out if iam not recieveing spark after TDC , ,THATS WHY I NEED TO KNOW IF THE SENSOR RECIEVES THE PULSE FROM A CW OR CCW DIRECTION THEN I CAN WORK IT OUT FROM THERE , AS I HAVE NO TIMEING LIGHT .THANK YOU

 

[durban]

Re: sensor pulse witch way clock\w or anti clock\w if fiywheel turns clock\wise

no worry i have worked it out ,by placein the sensor in a 12o clock position in relation to the coil , moving it clockwise, takes the motor to atdc, & anti clockwise to btdc, my 60hp 1970 conversion to 1977 70hp timerbase& sensor , was sucessfull , the motor starts even better , fistime