Shear Pin, Prop Evinrude model 3706

[outboardsusa]

Anyone know what size or number shear pin a 1967 Evinrude 3 hp Lightwin model 3706 uses? Kind of hard to find anymore or find information on this motor, thank you...

 

[Watermann]

Re: Shear Pin, Prop Evinrude model 3706

Does your motor have the original prop nut with the holes in it or does it have a castle nut? If it;s the original nut with the holes, you should be able to find a stainless cotter pin that fits in snugly by taking the nut with you to the hardware store.

 

[Daviet]

Re: Shear Pin, Prop Evinrude model 3706

Does this help you out any?
Johnson Gearcase Group Parts for 1967 3hp JW-22 Outboard Motor

 

[geoffwga1]

Re: Shear Pin, Prop Evinrude model 3706

Does your motor have the original prop nut with the holes in it or does it have a castle nut? If it;s the original nut with the holes, you should be able to find a stainless cotter pin that fits in snugly by taking the nut with you to the hardware store.

That would not help him,he needs a drive pin,not the cotter,they are not the same thing.It's # 30 on the diagram posted by Daviet

 

[outboardsusa]

Re: Shear Pin, Prop Evinrude model 3706

Does this help you out any?
Johnson Gearcase Group Parts for 1967 3hp JW-22 Outboard Motor

Thank you for the illustration, in the parts below it seems to call a shear pin a drive pin

 

[outboardsusa]

Re: Shear Pin, Prop Evinrude model 3706

thank you, looks like the lower unit on the 3706, same year same hp