I got 1997 Evinrude 130Hp on a 20 sunbird, I took out this AM start right up let it warm up ready to take off but it want engage either forward or reverse, Loaded back and went home bummed out, I disconnected the shift cable from where it mount to the arm that connected to the shift link to eliminate that part, Shift link move and engage pro to forward and reverse by hand spinning , However when put back together and use the controller it want engage but the throttle cable move freely on attempt to engage it forward or reverse which tells me I got good throttle cable but is it the shift controller OR Shift cable ??
Attempted to take of the controller to inspect the cable ends but NO success .. any suggestion on how ? This way I can inspect the cable from both end ..? does any one got any pic ..?
It?s the shift controller that combine both shift and shift together like most OMC , How difficult to replace the shift cable and what that all involve with it ?all help is greatly appreciated
Attempted to take of the controller to inspect the cable ends but NO success .. any suggestion on how ? This way I can inspect the cable from both end ..? does any one got any pic ..?
It?s the shift controller that combine both shift and shift together like most OMC , How difficult to replace the shift cable and what that all involve with it ?all help is greatly appreciated