'96 Chevy K1500 4x4 350 V8 was plowing today and I got stuck, went in and out of Drive and Reverse and couple of times to try to rock it out, and I just about had it when I put it into reverse and it bogged right down, will not rev over 1600 rpms in reverse even to the floor and does not even attempt to move.<br /><br />I put it in Nuetral and it goes forward. So now I have Nuetral, Drive, 3, 2, 1 that all move the truck forward.<br /><br />Park is park. Reverse doesnt work just seems like its locked up.<br /><br />I went to some car dealers to buy a new truck, one told me its a common problem with the linkage inside the tranny and needs to be adjusted. I went home, dropped the pan and I cannot find any adjustments in there at all.<br /><br />Tranny has 66K miles on it and I just serviced it this past fall, no metal in the pan or magnet.<br /><br />Took the linkage on the outside of tranny apart, and did it all manually with no change in condition.<br /><br />Any ideas guys, I was in 4wd low at the time and may have broken something I am afraid, Thanks<br /><br />-John