FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I have an Evinrude 70 hp Model # 70873C. I believe its a 1978 model. I'm trying to purchase a new prop for it. How do I tell if it's a small or large gearcase?
I think the large gearcase has a set screw beside the water inlet on the lower unit. Where the smaller gearcase does not have that setscrew beside the water inlet.
If you have the standard 20" midsection, the prop is a standard V4/70 hp prop. If you have the short shaft (15") midsection, the prop required is a 50 hp size prop.
Thanks for the information. My case for the 1978 evinrude 70 hp model # 70873C is the large case. The outside of the housing measures 4 1/16 " which is the large gear case.
Another reference point the small gear case has 4 water inlet holes and the large gear case has 3 water inlet holes.
