Working with a 73 65hp Johnson it will start on muffs and run good and when you put it in the water it will start and run on high idle when you put it in gear it dies instantly and will not start and when it does has to be chocked to run when it goes into gear it dies instantly no coughing or sputtering just dies. I even checked to see if lower unit was locked but I can turn motor with prop in gear. Compression is 103-105 in all 3 cylinders did a spark test all 3 jumped 7/16 gap 2 were a little purple instead of blue/white is that right any help would be appreciated thanks shawn