This boat is I believe a 99, regardless its an Alpha 1, Gen 2 drive. I've just replaced the bellows and water supply hose and was about to hook up the speedometer hose and figured I'd blow into it to make sure the speedometer moved, it didn't. Then I disconnected the tube to it under the dash and tried to blow back through it, I couldn't.
Is it kind of odd that this tube/hose between the leg and speedometer would plug or does it happen? I'm wanting to try a shot of shop air blowing from front to back but I'm concerned that it may rupture the tube... Any ideas on where or how to clear this out.
FYI, I bought this boat from a friend about 3 years ago and I'm just now having time to make it seaworthy. I feel that I should have checked this before I reinstalled the bellhousing and hoping that it's a fairly simple fix.
Is it kind of odd that this tube/hose between the leg and speedometer would plug or does it happen? I'm wanting to try a shot of shop air blowing from front to back but I'm concerned that it may rupture the tube... Any ideas on where or how to clear this out.
FYI, I bought this boat from a friend about 3 years ago and I'm just now having time to make it seaworthy. I feel that I should have checked this before I reinstalled the bellhousing and hoping that it's a fairly simple fix.