starts to misfire after 10 minutes top end

bshawmn

Recruit
Joined
Jun 16, 2005
Messages
3
1989 85hp Chyrsler Force outboard. Can't read model and serial numbers. Just last year I've had new impeller put in and carbs rebuilt. The engine starts out fine, but about 5-10 minutes of crusing, it starts to misfire, but only above about half throttle. Idle runs fine, up to midrange and then the misfiring starts and she bogs down until I cut off the throttle. I've changed plugs while out on lake, and the misfire is still there as soon as I take off. I'll bring it home, let it sit overnite, and bring it back out and it will start out exactly like the day before. (misfiring about 5-10 minutes into outing). Runs great at full throttle, but only for those 5-10 minutes, then the misfiring starts.<br />Thank you for any help.
 

Solittle

Fleet Admiral
Joined
Apr 28, 2002
Messages
7,518
Re: starts to misfire after 10 minutes top end

bshawmn - Welcome!!!<br /><br />One of the moderators will move this to the Chrysler/Force section. This section is for non repairs/problems.
 

JB

Honorary Moderator Emeritus
Joined
Mar 25, 2001
Messages
45,907
Re: starts to misfire after 10 minutes top end

As SoLittle says. . .
 
Top