Stator wire identification

[Rdppilot]

I have a 1987 inline 6 115hp. I have completely rebuilt this and am in the process of wiringetting everything back up, my concern is the stator wires compared to the seloc manual. The manual show's the yellow sleeve being on the red and blue wires, mine is on the red/white and blue/white wires which also the red/white wire has the notch cut out of the boot for the red wire from the idle stabilizer. Not what do I go by, seloc shows the yellow sleeved wires going to the lower switch box, which doesn't match with how my wires are sleeved and color coded. Help

 

[Rdppilot]

So should I ignore which wires the yellow sleeve is one in regards to my stator and wire it just how the seloc manual show's it, Red and blue wires going to the lower switch box and red/white and blue/white wires going to the upper switch box. Or does it not matter which ones actally go to which switch box. As long as it's a red and blue going to either one

 

[Faztbullet]

As long as yellow sleeved trigger and coils go on the same box it don't matter about stator...and leave the stabilizer disconnected.