97 4.3GL PLKD
Running rough last time out. So, I thought I'd change the plugs. While changing the spark plugs I noticed the starboard side three were rusty at the tips. Port side were good. Then I ran on muffs to check carburetor adjustment and saw steam like smoke coming out of the rocker hoses and a few drops of water below them on the top of the motor. Then I took off the valve cover and saw the water and oil sludge on the inside(see pics below). I checked the dip stick and it was clean and the oil level was normal. Need advice on whether to just take it to a boat mechanic or should I try to find where the water is coming from first. If it's not too difficult.


Running rough last time out. So, I thought I'd change the plugs. While changing the spark plugs I noticed the starboard side three were rusty at the tips. Port side were good. Then I ran on muffs to check carburetor adjustment and saw steam like smoke coming out of the rocker hoses and a few drops of water below them on the top of the motor. Then I took off the valve cover and saw the water and oil sludge on the inside(see pics below). I checked the dip stick and it was clean and the oil level was normal. Need advice on whether to just take it to a boat mechanic or should I try to find where the water is coming from first. If it's not too difficult.

