Steering Ram Identification

[20pilot]

Can anyone here identify this ram. I need to replace the seals but I am not sure what ram this actually is. Could anyone tell me what ram or seal kit is needed.

Thanks

 

[64osby]

Re: Steering Ram Identification

Usually there is a tag or plate that will ID the ram.

 

[Bob_VT]

Re: Steering Ram Identification

Pull the ram out and visit a shop that makes hydraulic hoses and they can probably match the seals. Places that repair heavy equipment, forklifts.......... might be as simple as visiting NAPA for o-rings. Who made the Boat???

Is that for an outboard????? What boat is it mounted in. Looks like an I/O set up to me. Please respond so I can move this post if needed since this in the Non-Repair Outboard Discussions area.

 

[alldodge]

Re: Steering Ram Identification

Can anyone here identify this ram. I need to replace the seals but I am not sure what ram this actually is. Could anyone tell me what ram or seal kit is needed.

ThanksView attachment 221261

It resembles seastar but could be about anyone of them. Just about any of them will work as a replacement so long as they match up. Check the helm and pump to see if there is a manufactures name. If you have basic size could try giving a call to seafirst or seastar which they may be able to assist.

Seaboard Marine handles these at 800 200 BOAT