FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Salt water I presume. First thing is to remove plugs anf fill cyls with oil to slow corrosion. Remove carb and soak and rebuild. Coat everything with oil and check lower unit oil and replace oil.<br />After that only trial and error will tell what needs replacing.<br />Good luck
Your motor will require a complete tear down. Most likely all electronics will have to be replaced. I recommend that you get the OMC shop manual before you go to far.<br /><br />You may luck out but I would not be optomistic. A motor submerged in salt water goes south real quick.
