rich_kildow
Cadet
- Joined
- Apr 21, 2010
- Messages
- 26
1990 1208x90B Force 120. A while back I added a pressure and temperature gauge to help monitor my motor. I just stumbled across the threads for adding a tell-tale, but with a well functioning pressure gauge is this even necessary? Would it mess up my readings on my gauge?
The gauge works very well, usually reading at the 1/2 way mark. I put a new impeller in yesterday and it reads near 3/4 now at throttle. The impeller was worn and had taken a set, but was still functioning nicely, so I was able to detect a fairly minor decrease in performance.
The gauge works very well, usually reading at the 1/2 way mark. I put a new impeller in yesterday and it reads near 3/4 now at throttle. The impeller was worn and had taken a set, but was still functioning nicely, so I was able to detect a fairly minor decrease in performance.