Re: Test proceedures
Thanks for the reply. Have pulled the plug and jumped the solenoid ....no spark. Got another power pack and used it ....no spark. Test both with an ohm meter and they both test the same. Replaced the rectifier ... no spark. Used an ohm meter to test the coil charging unit .... tests good, no grounding. Tested each coil itself, one test @2.14 ohms, the other a little higher ... goes from 2, something up to 3.16ohms. Have timeing light on the plugs to test for spark, have also pulled plugs and tested to ground ...no spark. Was going to pull the flywheel, but the nut is real frozen, and don't have an impact wrench. <br />I'm stumped.