Thanks for the help.

[JB]

When your problem is resolved, post here who helped you and the outcome.

 

[HeadHunt]

Re: Thanks for the help.

Almost a year ago but it was Clams_Canino and Rodbolt. Thanks guys.<br /><br />Headhunt

 

[Neonbee]

Re: Thanks for the help.

Multiple items!!! (and more to come i'm sure!! )<br /><br />All turned out in a positive way.......<br /><br />Thanks to Clams, Laddies, Tim Mathis & Jheron<br /><br />~Neonbee~

 

[Drybo]

Re: Thanks for the help.

North40, he solved oil alarm, simple float in 91-115 merc tank, dealer was going to replace oil injection pump, saved $. Also Laddies has solved too many too list. Many thanks.

 

[marnejohnson]

Re: Thanks for the help.

I got my 1978 SeaRay Overnighter started....many helped me. It turned out to be a lose power bolt on the starter, I just added some locktite to the bolt and cleaned the connections and reinstalled. runs like a beauty now!

 

[tengals123]

Re: Thanks for the help.

Clams and laddies<br /><br />thanks a bunch.<br /><br />cheers

 

[pinkfloyd]

Re: Thanks for the help.

Thanks iboats for such a great forum!!!<br /><br />And a salute to members like Tim Mathis. For his time he went out of his way with many emails and even phone support.<br />After troubleshooting two motors helped us through our first powerhead rebuild.<br /> Thanks Floyd

 

[johnz8]

Re: Thanks for the help.

thanks rickster and willybwright. Info was jous what i needed

 

[molsenice]

Re: Thanks for the help.

Motor boater bill, D., Rodboalt, Laotzu, Jb and many others have managed to keep me from loosing my temper and in doing so have become my personal hero's!!!!!!!! IBOATS - awesome what else can be said - many thanks, Molsenice

 

[timmathis]

Re: Thanks for the help.

Thank you, JB and all mods. For your outstanding supervision and comments!!! Tim Mathis

 

[molsenice]

Re: Thanks for the help.

Dido Tim Mathis, also thank to Rodc and North40 for my latest dilema - ended up being a dead battery after all

 

[emzle]

Re: Thanks for the help.

Thanks to Ed Mc and Laddies for their help in getting my 02 115hp 2+2 back on the water!! Many others helped with thought provoking comments which makes this forum great.

 

[andy6374]

Re: Thanks for the help.

I would like to thank KCLOST, DasBot, and Laddies. DasBot and KCLOST walked me through where and how to mount my CDI rect/reg #194-5279. Laddies helped me troubleshoot.<br /><br />Also, thanks to everyone else at the forum. If I wrote down everyone who has every helped me and every little thing that got fixed, well....We would be here for a long long time.<br /><br />-andy

 

[timmathis]

Re: Thanks for the help.

Clams Canino For president!<br />He is the man when it comes to Mercury inlines. <br />Great guy, He has been glad to help me and many others in need here at iboats with a problem.<br />He also will not take you to the cleaners when you get that hard to find part from him. <br />Thanks again Clams, Tim Mathis

 

[ricksrster]

Re: Thanks for the help.

Thank you Andy for the high voltage answer. It puts my mind a little more at ease

 

[OperativeK]

Re: Thanks for the help.

Clams and Laddies... thanks<br /><br />Ok finally got around to it so here they are:<br /> http://opk.gotdns.org/boatlaunch.wmv <br /> http://opk.gotdns.org/boatonwater1.wmv <br /> http://opk.gotdns.org/boatonwater2.wmv <br /><br />Some are kinda large for 56k! Warning. I wouldn't DL unless you have cable or dsl.

 

[MortenH]

Re: Thanks for the help.

Clams and Rodbolt - thanks a lot! <br /><br />My Tower of Power is running like a dream! Completely rebuild powerhead and lower unit as my first job ever on an outboard (or any other engine). I could not have done it without you! <br /><br />-M-

 

[rocks]

Re: Thanks for the help.

Kclost is the best,he alway's helps.

 

[profire]

Re: Thanks for the help.

Tucker 1 you are the man saved 250.00 listening how to take that quicksilver3000 apart. then went and did my own thing but my line will be tight tonight thanks to this forum.

 

[Chelquay]

Re: Thanks for the help.

Thanks Rovernaut,andy6374,AMD rules.<br />I got the flywheel off,thanks to a puller bought from e-bay, and a new stator bought from boatfix.com. The beast is now running.