Thanks for the help.

[Chelquay]

Re: Thanks for the help.

Laddies & Laotzu(previous post)<br /><br />Thanx it's good to know that others are willing to share their knowledge with us 'apprentices'.<br /><br />I dare say this won't be the last time I visit iboats.

 

[Chelquay]

Re: Thanks for the help.

Just a footnote;<br />The parts I required were bought from the USA. It was cheaper and the delivery quicker than here in the UK..........Why is that???

 

[madmarlin]

Re: Thanks for the help.

re Leaving ouboard sitting<br /><br />Thanks to all the guys who replied, am a new commer to this forum and would just like to say it's great and thanks again.

 

[timmathis]

Re: Thanks for the help.

Thanks, To all marine tec's that are members of iboats. Without you we would be messing things up without your good advice. Thanks again for your time and help!!! Tim Mathis

 

[starrtwo]

Re: Thanks for the help.

A few people seem to be helping me. Everyone here seems to very knowledgable. Thanks

 

[Smig]

Re: Thanks for the help.

Inlineal, Mixerjv, Laddies and Saumon - <br /><br />Thank you for tilt & trim 101. You guys where patient and took the time to explain a few basics to a boating newbie.<br /><br />Once I actually find the parts and get this installed I will post how it went.<br /><br />Thank you<br />Shaun

 

[Caddy_Kid]

Re: Thanks for the help.

Thanks to: Clams Canino, Laddies and Ed Mc. for your help on figuring out what year m Merc 1000 was (down to the exact year without even a serial number plate to go off of!) as well as telling me how to fix stripped spark plug threads. Thanks guys!

 

[rajawolf]

Re: Thanks for the help.

Completely rebuilt my mariner powerhead inline 4 and without the help from many here..I would not have been able to do it.<br /><br />Thank you very much to everybody who took the time to answer my questions.<br /><br />Cheers,<br /><br />Tony

 

[eli_lilly]

Re: Thanks for the help.

Thanks to Clams and the other crew, their instructions for troubleshooting the CDI switchbox allowed me to quickly and cheaply diagnose and repair the problem with my 72 merc 650.<br /><br />I am so excited and grateful, you can't imagine!<br /><br />-E

 

[capt1992]

Re: Thanks for the help.

Laddies came through for me. Thanks again. capt1992

 

[CaptainMick]

Re: Thanks for the help.

Thanks to Andy for his advise on a few things to try.... work in progress!

 

[banchigu]

Re: Thanks for the help.

So far thanks guys/gals if only our goverment ran as smooth as this fourm...

 

[pasquale1968]

Re: Thanks for the help.

Awesome Forum im ghlad i'm here Pasquale1

 

[burnboyy]

Re: Thanks for the help.

thanks murrayw91, chinese walker, and Eric B. I had multiple problems causing water not to cool my 9.8 mercury, Eric B, and Murray knew my specific problem while chinese walker told me the easiest way to diagnose it, great work all you guys<br /> -Justin

 

[burnboyy]

Re: Thanks for the help.

Thanks to myoutboards, he knew exactly what was wrong and told me how to fix it. I don't know how he knew exactly what the problem was with all the possibilities it could have been. Bridged the two wires he said and my 85hp mercury fired right up, saved me a ton of money on putting in a new trigger, the man knows his stuff<br /> -Justin

 

[jml82]

Re: Thanks for the help.

Thanks to WillyBWright for the welcome and the motor year!

 

[snowstud98@hotmail.com]

Re: Thanks for the help.

Helped with my lower end shifting problem alot of posters thanks for everything Erik

 

[tb56dog]

Re: Thanks for the help.

thank you rickdb1boat,AMD rules,Texasmark my waterpump is finally operating right!

 

[floteboat]

Re: Thanks for the help.

Thanks to ya WillyBWright help big time.

 

[ronnieboy]

Re: Thanks for the help.

thanks everybody , especially andy6374, fixed overheat problem, learned a lot bout cooling a v-6 , will try to pass it on . thanks again ron