The PeeHole doo-dadd

[NathanY]

My pee hole got clogged up, so naturally, I pull it apart to clean it out. I got it cleaned, but I broke the little plastic doo-dadd, that goes in the lower cowl pan. I need a new one. OMC part# 321885. Can anyone help? Joe Reeves Im sure you have one laying around somewhere.

 

[bubbakat]

Re: The PeeHole doo-dadd

Nathan, if you still have both pieces of the do-dad.<br />Take you a ink pen refill the metal kind and a little drill bit and ream out the plastic hole just enough to put that refill thru it and file off the ends. Then walla you still have your connector with the flat end and the barbed end for the inside.

 

[NathanY]

Re: The PeeHole doo-dadd

I broke off both the barbs when I got mad cause I could not get the hose off.

 

[dajohnson53]

Re: The PeeHole doo-dadd

Just to plant an idea in your head in case it makes sense with the pieces you have. JB weld will hold a broken plastic part real well. I've "refabricated" things (most recently a control knob for an air conditioner) by building it up with JB weld, using scotch tape to "form" it around the old piece and then a drill to open up a hole that was in the original piece but was now obscured by the JB Weld. I also cleaned it up with a file and dremel tool to make it fit.<br /><br />I can sort of imagine being able to fix the plastic fitting on my outboard telltale this way, but it might not be at all applicable to yours.