FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I have a problem with trimer.when i push swich up the motor goes up with no problem,but when i try bring the motor down then no work.and now mine motor still all way up,i cant bring it down.any help guys please.
i had the same problem with my yamaha 150. the problem was that i was low on hyd. fluid. when i put the motor all the way up the resevoir was empty so the pump would not pull the motor down. i filled the resevoir up and bingo.
There is 2 solenoids on the engine . 1 has a blue wire and 1 has a green wire . one is up , 1 is down . you can here the one click that works and the one that does not click or dose click and the motor doesn't run is the one that is bad . The one that is bad and needs to be replaced
