Re: Tilt and Trim problems
I tried both sites, It doesnt show nothing about the power tilt and trim unit. Unless i call them and they would have the parts. Thanks for all the info.
O.K........ Click here............
http://www.brp.com/en-US/Related.Products/Parts.htm
Now....... Under the "Parts Heading" click on "Visit the site now".
Next...... Click on the green check mark in the box located in the top right hand corner and select "View Parts Catalogs"
Now....... Click on the "Go" button beside the box, again in the upper right hand corner of your screen, that says "Evinrude".
Now...... Select the appropriate folders for your year, horsepower, and model number.
Yours
IS listed. There is an exploded diagram for your unit available here,
WITH the available part numbers for
EVERY seal. I would not recommend visiting the local hydrolics shop, although I'm sure they
could possibly have something that will work. There has likely been an update to the replacement seals you are trying to acquire. Get the right parts that were designed for the unit and save yourself a
possible hassle. Good luck............ ALAN
EDIT: I checked the site for your outboard and it, in fact, does not list a trim unit for your outboard. Obviously someone has retrofitted it to accomodate the unit you have in place. Not uncommon. If you can get some casting numbers off the unit, this would be a big help in assisting you in finding the parts diagrams and part numbers that you need for it.
