tilt and trim

[bubbas04 capecraft]

I have an 04 90 hp yamaha i replaced the tilt motor and the relay switch and all i get is a clicking noise. the motor does not move. never really had any signs the the motor was going out. it just stop working all of a sudden. i have allready spent alot of money replace the motor and relay and still just getting a clicking noise can any one help.

 

[ianyoung77]

Re: tilt and trim

Clicking noise is normally a poor connection somewhere. Have you checked it out with a meter?

 

[99yam40]

Re: tilt and trim

was that the relay or just the switch that you replaced?
Could be the relay, low battery voltage, bad ground, bad wire connections.
Here is a thread that may help some with the troubleshooting.
http://forums.iboats.com/showthread.php?p=2467433#post2467433

 

[bubbas04 capecraft]

Re: tilt and trim

I have changed the relay. and the motor. checked all the connections. and the battery is fully charged. and all im getting is a clicking noise. what am i missing. the switch on the motor and the throttle make the same noise. so i not think its the switch.

 

[99yam40]

Re: tilt and trim

Did you read the other thread?