Tilt/Trim clicking

[vicda98]

My motor will raise and lower, OMC 92' 115 V115SLEND, but when it does there will be a clicking sound. I just put some quicksilver trim/tilt fluid in the resivoir thinking it was low, but the clicking sound is still there. Any advice would be greatly appreciated.

 

[rickdb1boat]

Re: Tilt/Trim clicking

May need to grease the tilt tube. Could be binding up some. Does it sound electrical or mechanical?

 

[solidwaste]

Re: Tilt/Trim clicking

If it is electrical you probably just have a bad syliniod..

 

[vicda98]

Re: Tilt/Trim clicking

Rick,<br /><br /> Sounds mechanical, clicking not coming from the tilt motor, what kind of grease is good for this? And is there a fitting wehere you put the grease in?

 

[nektwister]

Re: Tilt/Trim clicking

Its probably the solenoid i have a johnson 115 1978 and mine was the same problem try the solenoid it worked for me.

 

[vicda98]

Re: Tilt/Trim clicking

I'll check both the solenoid and the tilt tube and get back with yall with my results. I've got a Seloc manual for my engine, this should tell where the solenoid is mounted?