FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Do you hear the relays 'click' when activating the switch?
If not, either relay(s) gone or you do not have power to the relays.
Check with a multimeter on the thin green and blue wires going into the relay socket.
If you have no 12V into the relays, thin green or red depending up or down, check the trim switch in the handle, loose contacts in extension cables etc. Into trim switch: red - 12 Volt, out from trim switch green or blue.
i checked the trim switch on shifter and it works from there.the switch on the side of the motor must be bad.but it still does not move up or down like if is stuck or something.when i hit the switch to go up or down i hear the trim motor.it hasnt moved up or down in 6 years.
If you hear the trim motor running, then it might be:
1: No oil in the unit?
2: The release valve is not tightened or leaking?
3: Internal problems in the unit, and the whole unit must be removed from the engine!
