Tilt Trim unit

[hondo]

I have a 1985 70hp 3 cylinder evinrude. I would like to get a tilt trim unit for this season. I need to know what to get. Is it the 3 wire or 2 wire? Is there a model number? Any help would be greatly appreciated. Thanks.<br /><br /> Pete<br /><br /> I could go to Ebay.

 

[zzzzz]

Re: Tilt Trim unit

just the motor(2 wire)is part#394176 and available...the complete hydraulic assy. is part #434803 and that is also still available thru bombardier..,email me for a parts qoute-bobquay@hotmail.com

 

[Joe Reeves]

Re: Tilt Trim unit

Skecher.... Where are you located, and do you need just the hydraulic assy that fits between the transom brackets, or do you need the whole complete assy..... Hydraulic assy, harness, relay junction box, PTT switch & harness etc? In short, you have a manual tilt and need to install from scratch. ReevesJ32@aol.com

 

[hondo]

Re: Tilt Trim unit

Joe,<br /><br /> I'm located in Greenwich Ct. I have to pull it up by hand so I need the whole setup. I have the tilt switch already in my control shift.

 

[Joe Reeves]

Re: Tilt Trim unit

Skecher.... In my remaining stock, I have one new complete PTT assy. This is a unit such as one would install on a engine such as yours that had been purchased as a standard manual tilt engine. In short, this unit consists of everything. If interested, contact me via my e-mail address and we'll discuss it.... ReevesJ32@aol.com