timing a135 throttlepickup,5 degreescant get it!

[dzoolk]

salutations!..! have a 135, 1975, BUBBLEBACK,135589e.just rebuilt and sandblast im ron paint absolutely showroom,cond,took me 2 months!.however...<br />how do i get my 5 degree pickup?its still not near where it should be!.cause when shes idleing she burps here and there and shuts off. i had a prob with to high a reving but it turned out to be my throttle plates wern't really closed,ok so now she idles very low , but the 5 dgrees still are not at the tdc mark.with my fisher price timing light.=] how can i get it?she's just rebuilt so i can't just go w.o.t to get the 20 degrees till shes broken in.or i risk the chance of seizure.... #30 idle jets and #62 main jets.level float.all new rapair electric.running at 110 temp at idle in 86 degree water...thanks much, titusville florida,

 

[OBJ]

Re: timing a135 throttlepickup,5 degreescant get it!

You trying to get idle timing or top end timeing?

 

[rickdb1boat]

Re: timing a135 throttlepickup,5 degreescant get it!

Maybe this will help:<br /><br /> web page

 

[dzoolk]

Re: timing a135 throttlepickup,5 degreescant get it!

ok.. i got the 5 degrees pick up.that i have been after!and is required in the manual.in gear and just above not stalling. . how ever the time lever is straight up! which means the idle adjusting screw is not against the block like one would think it should be so i can adjust the idle! rt now the screw is just doing nothing since it doesnt touch anything,, now ,,i figure i could do a few things .<br />#1> i could perhaps adjust the idle with the throttle cable wheel..?and for get the idle screw?.<br />#2 get a longer screw so it will reach the block?<br />what do ya think thanks dz ..=]