torque steer very bad! *UPDATE* FIXXED!

[ntoracn@yahoo.com]

Re: torque steer very bad! *UPDATE* FIXXED!

WILLY, It's not that you can't hold it, it just wears you out after a short time. I bet there is a steady 20 to 25 lb pull at or near WOT. The skag is not bent.<br /><br />ALL Other posters: Having a TIG welder and a full fab shop at home, I should be able cook something up.<br /><br />Thanks to all for your help.

 

[MercFan]

Re: torque steer very bad! *UPDATE* FIXXED!

Good stuff fast LC4!<br /><br />120Hz freq, I'd say no more than 50-60 Amps. Gas flow at around 10-15 l/min (20 if it's windy). Set it up for about 60% cleaning cycle, 40% penetration.<br /><br />Stainless steel brush and acetone to clean the aluminium oxide. V the parts nicely and you'll be all set!