I have a trim and tilt that has been sitting in a shed for 6 months for my 86 johnson 50hp. I was in the process of installing it on my motor but needed to lower the shaft prior to installing it. It worked last time it was installed, but when I hook it up to a 12v battery and cross the red and green or red and blue wires I get no response from the trim and tilt. I am an Elec. Eng. student so I have taken it apart and checked continuity in the wiring and connections, the electrons are flowing.
It worked before put in storage, any ideas?
It worked before put in storage, any ideas?