I have posted before about this problem and thought I had it narrowed down to the solenoid. When I connect the blue and or green to power I get it to go up and down no problem. The solenoid clicks when I try to ingage it with the switch. Replaced switch still same so I figured it was the solenoid. Today I received the new one and when I put it in I get no click nothing. I checked the power going in to the solenoid and it is there I checked the powed to the switch it is there. I put the old solenoid in and I get a click but of course no movement from the trim. Could they have sent me a bad solenoid ? Or the wrog one ? it looks exactly like the old one. It has two small terminal labeled i and s top one i connected to the blue wire. Bottom one labeled s has two wires connected to it I think one might be the ground not sure. This is making me crazy....Please help me figure this out.
