I have 4 prong flat connector.
Brakes, turn signals, running lights all working. However when the lights are on the running lights are much brighter than the turn indicators both left and right. I have checked and the sec`ond filiment is flashing just so dimly that it cannot be seen with the running lights on.
I have replaced both rear taillights. I have replaced the trailer end of the connector (pigtail???) and have cleaned and reattached the ground to the trailer frame.
In an attempt to diagnose I even ran a second wire from the white connector to the frame and when that did not work directly to the bolts on the rear lights. Made no difference.
The only thing I have not checked is the vehicle end but the problems were initially occurring with a different vehicle so that is last thing I will check (or next if you are counting).
Any help will be appreciated
Mike
Brakes, turn signals, running lights all working. However when the lights are on the running lights are much brighter than the turn indicators both left and right. I have checked and the sec`ond filiment is flashing just so dimly that it cannot be seen with the running lights on.
I have replaced both rear taillights. I have replaced the trailer end of the connector (pigtail???) and have cleaned and reattached the ground to the trailer frame.
In an attempt to diagnose I even ran a second wire from the white connector to the frame and when that did not work directly to the bolts on the rear lights. Made no difference.
The only thing I have not checked is the vehicle end but the problems were initially occurring with a different vehicle so that is last thing I will check (or next if you are counting).
Any help will be appreciated
Mike