Two quick painting questions ...

[SeaMasterZ@aol.com]

the little tinny needs some painting on the inside, I was considering using rubberized pool paint. My buddy did this on a freshwater boat that never sees rough water, I wonder if anyone tried this on a salt water boat? Im hell on my boats, I use em HARD, and have been known to bounce off a sand bar or two in my day.<br /><br />I just bought the little guy, and it seems to hold water in pretty well, so it aught to keep it out, I just figure since I have to put a new floor in, I might as well get that crummy old foam out and wire wheel it down and put a good barrier coating on it, and be done for a dozen years or so<br /><br />Crabbin season is almost here, time to get it DONE

 

[BaysideMarine]

Re: Two quick painting questions ...

I would prep it well, etch prime it and give it a nice coat of 2-pack.<br /><br />Cheers,<br /><br />Nicholas

 

[SeaMasterZ@aol.com]

Re: Two quick painting questions ...

2-pack? does it come with a shakur, er, shaker?<br /><br />epoxy and catalyst I suppose? will that seal in leaks?

 

[DJ]

Re: Two quick painting questions ...

Shaken, not stirred,<br /><br />Yes, it will fill, to a certain extent.

 

[imported_rusty]

Re: Two quick painting questions ...

rhino liner it!!