vintage boat id help

[igetby79]

So I have an old aluminum boat my grandfather gave me when I was 13 to fish ponds with...probably painted it 3 times over 2 years never titled or registered no motor...30 years later I pull it from the back of the property and give it a good look over...can't say I have ever seen a boat like this one...trihullish design maybe made in the 50s or 60s no hin tag or numbers stamped anywhere and I used a mirror and stripped boat bare literally looking for one...no brand name anywhere to be found...I would like to have some info as It's so unique I want to do a custom restoration on it and give it to my kids to fish out of...grabbing straws and have found no info after hours and hours of browsing online....crappy pics below...not original trailer...thank you in advance

 

[igetby79]

So I have an old aluminum boat my grandfather gave me when I was 13 to fish ponds with...probably painted it 3 times over 2 years never titled or registered no motor...30 years later I pull it from the back of the property and give it a good look over...can't say I have ever seen a boat like this one...trihullish design maybe made in the View attachment 37243550s or 60s no hin tag or numbers stamped anywhere and I used a mirror and stripped boat bare literally looking for one...no brand name anywhere to be found...I would like to have some infoView attachment 372432View attachment 372433 as It's so unique I want to do a custom restoration on it anView attachment 372434d give it to my kids to fish out of...grabbing straws and have found no info after hours and hours of browsing online....crappy pics below...not original trailer...thank you in advance

Forgot to add boat I 14 foot in length

 

[dwco5051]

Very interesting. I have never seen one like it before but am intrigued by the construction of it. Hope someone here can fill in the blanks.

 

[Scott Danforth]

Over 150,000 boat manufacturers have come and gone in the last 100 years, with many of them making less than a dozen hulls ( most making only 1 or 2). Best bet is to look through the fiberglassics library and post better pictures