Volvo 7.4 GI missing - Riser Problem???

Status
Not open for further replies.

BOATLUD

Recruit
Joined
May 29, 2010
Messages
5
Re: Volvo 7.4 GI missing - Riser Problem???

Having a similar problem. Lost both engines. Salt water getting back into the cylinders. 4 year old Manifolds and Risers and a Four Winns
 

Attachments

  • Inside Riser Reduced.jpg
    Inside Riser Reduced.jpg
    16.2 KB · Views: 1
Last edited:

BOATLUD

Recruit
Joined
May 29, 2010
Messages
5
Re: Volvo 7.4 GI missing - Riser Problem???

We just pulled these riser's. Stored the boat in fall of 98 It was running fine. When we launched it this year the engines were gone. How does this salt water get way up in the risers like this. Valves rusted on center cylinders. engines probably gone.
 

Attachments

  • Inside Riser pixels.jpg
    Inside Riser pixels.jpg
    114.1 KB · Views: 1
  • Port # 5 pixels.jpg
    Port # 5 pixels.jpg
    145.7 KB · Views: 1
  • Inside Riser's Bottom pixels.jpg
    Inside Riser's Bottom pixels.jpg
    90.2 KB · Views: 1
Last edited:

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: Volvo 7.4 GI missing - Riser Problem???

Best to start a new thread with your questions BOATLUD.
Not a good idea to just stick your question on the end of a year old post. Very few will see it.
 
Status
Not open for further replies.
Top