volvo trim and tilt

[danny1978]

hi guys i need some advice please on where to get a replacement motor for a electro mechanical lift on a volvo penta 6 cylinder diesel manufactured in 1968 i think
it was a 3 wire motor and was missing from boat when i purchased.
Don S kindly found the 200 drive manual for me but i am having trouble finding the parts number to get a replacement motor also alll the ones available seem to be 2 wire
any advice is greatly appreciated thanks in advance Danny
forgot to mention it is the aq200 model thanks again
(aqd29a/200)

 

[danny1978]

Re: volvo electro mechanical lift motor

Re: volvo electro mechanical lift motor

any advice is greatly appreciated peoples ... i am at a dead end here ,,, not sure if there is a universal motorfor these lifts and q's if i am not being clear enough will be answered asap thanks again

 

[captmello]

Re: volvo trim and tilt

Is this your tilt mechanism?

http://www.volvopentastore.com/MECHANICAL_LIFT_DEVICE_AQ_DRIVE_UNIT_250_270_MO_XXX_87999_814121/dm/*******.644585951--**********.807995214--store_id.366--view_id.317532

If so, looks like there are a couple aftermarket options.

http://www.iboats.com/Sierra_18_6792_Power_Tilt_and_Trim_Motor/dm/*******.644585951--**********.807995214--view_id.222172

Or

http://www.iboats.com/Mallory_Power_Tilt_Motor_9_18610/dm/*******.644585951--**********.807995214--view_id.365792

Good Luck.

 

[PiratePast40]

Re: volvo trim and tilt

You see them on ebay once in awhile. http://cgi.ebay.com/ebaymotors/NEW-VOLVO-ELECTROLUX-TILT-TRIM-MOTOR_W0QQitemZ150362971830QQcmdZViewItemQQptZBoat_Parts_Accessories_Gear?hash=item230254deb6&_trksid=p4506.c0.m245
They're a little pricey!

You might also try a marine boneyard and rebuild one.

 

[robjen1019]

Re: volvo trim and tilt

You can convert the old 3 wire system to a 2 wire pretty easily using 2 relay switches. I just did mine the other day when my pump went bad. You can get a 2 wire pump for half what a 3 wire costs, plus the 2 wire pumps have an easy filling container.

 

[Mario2909]

Re: volvo trim and tilt

Hi,

I see that you talk about AQ200. I got some Chris Craft with that engine 1974., and I got two question. First, you told about tilt-so please is it that tilt (exactly with that motor) for tilt for parkin etc., or for tilt at the time when the boat is on watter and going on? And, the second question, where I could buy sterter for that engine. It is very old AQ200 with Volvo Penta 50141 starter.

Tnx a lot, Mario

 

[Don S]

Re: volvo trim and tilt

Best to start a new thread with your question Mario, not just tacking on to the end of someone elses old thread. Your question will soon go un noticed.