wash port?

[FireAm94]

Right beside the oil level bolt there is a bolt missing where it says wash. Is this something I should definately plug before running the motor? I didn't think it would be a big deal since it runs water through it anyway but wanted to ask first.<br /><br />Thanx<br />Joe

 

[rodbolt]

Re: wash port?

hello<br /> well not knowing the exact engine you have I am going to say YES. because it is a port to screw in a flushing device. on some engines this port is between the pump and powerhead and on others its on the pump intake side. either way it should be blocked off. if its a yammi the same size plug used for the gearcase vent scew is the same as the wash plug. on the suzy q I cant remember.<br /> good luck and keep posting

 

[FireAm94]

Re: wash port?

I guess that info would help hehe. It's a Yamaha 40ESK. Would it need to be about the same length as the oil check bolt?<br /><br />Joe

 

[rodbolt]

Re: wash port?

hello<br /> yes the wash plug and the oil vent or the top plug are the same. or they were when the unit was made. drain or bottom has a magnent<br /> good luck and keep posting

 

[FireAm94]

Re: wash port?

Thanx for always posting with answers hehe. I'm new to outboards and it's always nice to have some help.<br /><br />Joe

 

[rodbolt]

Re: wash port?

no worries.<br /> I have seen one or two. always to help a fellow from alleybamy I grew up in grand bay AL and my mom still lives down in Mobile.