dungbeetle46
Seaman Apprentice
- Joined
- Oct 18, 2008
- Messages
- 41
I have twin F9.9 engines and one is not pumping any water so I suspected either a blockage or impeller.
I have removed the lower leg and the impeller probably needs replacing but not that bad that it shouldnt pump anything so still suspect a blockage.
My question is if i put a water hose on the water intake pipe on the bottom of the upper leg should I see water from the pee hole because I am not and I tried to find the top of this pipe up near the powerhead to try and pump water back down the pipe but to no avail.
so should i see water run straight through with a water hose or is the thermostat stopping the water or am i right with the blockage and if so, how can i clear it
Thanks
I have removed the lower leg and the impeller probably needs replacing but not that bad that it shouldnt pump anything so still suspect a blockage.
My question is if i put a water hose on the water intake pipe on the bottom of the upper leg should I see water from the pee hole because I am not and I tried to find the top of this pipe up near the powerhead to try and pump water back down the pipe but to no avail.
so should i see water run straight through with a water hose or is the thermostat stopping the water or am i right with the blockage and if so, how can i clear it
Thanks