Ok that's what I'll do. I'm going to check my points are really at 0.014 and then I'll time it at 30 degrees at wide open throttle and hopefully it'll start. I'll check back in in a few days! Appreciate your help.
So I took out the points and made sure they were opening and closing flush and readjusted them to 0.014. I set the timing to 30 Wot. I haven't yet tried to crank the engine but when I test the spark using the sparkplug I see I'm getting a very strong spark when I should but I'm also getting other small sparks while turning the flywheel (2 others). Would you know why that is?
I do get those strong sparks on each plug at the correct angle. I just seem to get very small static sparks on the other plugs at the same time.. anyways, not sure I'm being clear but I'm going to try to start it like that. I'll let you know!
