Westbend 80hp

[chrysler_joe]

Hi all
I have an old Westbend 80hp and I need the wiring harness that plug into the motor. It's rectangle shape with eight or ten pins also looking for any hood badging and a prop
Thanks Joe

 

[steelespike]

Re: Westbend 80hp

I go back about 60 years and if anyone had asked me if West Bend had made an 80 I would have bet money no.But son of a gun there it was in my aftermarket ser. manual.Did a little checking and it shares bore and stroke with the 45 & 50 back to 58 also may share the Tillotson OM carb with some modification.Wire codes..Positive ground system.
Blk. battery neg (hot)
Red.Batt positive (ground)
Blu. ign. circuit,
Yel.starter control circuit,
wht. Tach circuit,
OR.heat indicator circuit,
GRN. choke control circuit,
Purp.Charge indicator,circuit.
Have you tried over at the Antique Outboard Motor Club aomci.org.
you might try at langs outboards ,and twin cities.and of course watch
watch Ebay as all kinds of parts appear regularly.

 

[chrysler_joe]

Re: Westbend 80hp

Thanks for the reply
Will check ebay and antique motor clubs
Cheers Joe

 

[Frank Acampora]

Re: Westbend 80hp

Also try over at The Chrysler Crew